Dc Regulated Power Supply Manufacturer,Supplier and Exporter in China
Product Code : EL-TLE-15474
B. SPECIFICATION
- Features:
- Four Digital Panel Meters
- Triple Output
- Auto Tracking
- Auto Series and Parallel Operation
- Constant Voltage and Constant Current Operation
- Low Ripple and Noise
- Internal Select for Continuous or Dynamic Load
- Overload and Reverse Polarity Protection
- 3 1/2 Digits 0.39" LED Display
- 5V, 3A Fixed Output
- Technical specification: DC OUTPUT CH1/CH2: 0~30V/0~3A CH3 : 5V/3A Max
OPERATION MODE
- Independent: Two independent outputs and 5V fixed output. Output from 0 to rating volts and 0 to rating amperes.
- Ch1/Ch2 Series: Output from 0 to rating volts at rating amperes each. Output from 0 to double rating volts at rating amperes.
- Ch1/Ch2 Parallel: Output from 0 to double rating amperes at rating volts.
CONSTANT VOLTAGE OPERATION
- Line Regulation: 0.01%+3Mv.
- Load Regulation: 0.01% + 3mV (rating current3A). 0.01% + 5mV (rating current10A). 0.02% + 5mV (rating current10A).
- Ripple Noise : 1mVrms 5Hz ~ 1MHz.
- Recovery Time : 100S ( 50% load change, minimum load 0.5A ).
CONSTANT CURRENT OPERATION
- Regulation: Line regulation 0.2% + 3mA.
- Load regulation 0.2% + 3mA.
- Ripple Current: 3mArms.
- 5V FIXED OUTPUT Regulation : Line regulation 5mV.
- Load regulation 10mV. Ripple Noise: 2mVrms.
- Voltage Accuracy: 5V±0.25V.
- Output Current: 3A
- TRACKING OPERATION
- Tracking Error: 0.5% + 10mV of the master.
- Series Regulation: 300mV.
- METER Type: 3 1/2 digits 0.39" LED display.
- Accuracy: ±( 0.5% of rdg + 2 digits ).
- INSULATION Chassis and Terminal: 20M or above (DC 500V). Chassis and AC Cord: 30M or above (DC 500V).
- POWER SOURCE: AC 100V/120V/220V/240V ±10%, 50/60Hz
C. ACCESSORIES
- The trainer must come complete with soft copy and 3 copies of, operational and maintenance manuals in ENGLISH as well as Demo Video CD undertaken from supplier. Manual for the Software must be included.
- Cable cord
- Connectors in full set And all equipment needed has to be supplied to ensure the trainer system is functional
D. MANUAL This equipment must come with complete user's instruction manual in English.
E. INSTALLING AND COMMISIONING Installing and commissioning must be done within 1 month from the date of delivery at no additional cost from institution. All installation and commissioning should be completed before training at site can be conducted.
F. TRAINING Duration: minimum 1 days. No. of participant: minimum 5 persons nominated by the institution. Objective: - The trainee must be able to operate and run all the equipment and experiments. Training at site should be different date from the installation and commissioning of the equipment
G. WARRANTY At least 2 year inclusive of parts and labor /after sales service from the date of successful completion of Installation and commissioning and handling over.