Laboratory Isle Table Manufacturer,Supplier and Exporter in China

Product Code : EL-TLE-17596

• Laboratory tables with cabinets at the bottom and dividers at tabletops. Including built-in sink and faucet.

• All parts and elements is most chemicals resistant, acid and alkali resistant, scratch, impact and cutting resistant.

• C-frame or square tube pipe frame tables, customised size.

• Dimensions : L = 1800 mm, W/D = 1500 mm , H = 850-1100 mm

• Material Powder coated rolled steel, epoxy resin/HPL/ceramic, tempered glass, coated stainless steel

• Colour Light Grey

Metal Structure    

• Material : Steel

• Steel bearing structure : Elements wall thickness at least 2 mm 

• Surface treatment for steel elements : All steel elements cleaned with acid and coated with electrostatic, corrosion resistant and oven dried spray paint (thermally painted)

Worktop    

• Thickness : 16-25 mm thick lab grade worktop

• Materials (The vendor to propose all options for selection)

• Option 1: Epoxy Resin (light grey) ("DURCON", "EPOXYN" or closest analogue) countertops

• Option 2: Ceramic

• Worktop surface level from finished floor : 850-1100 mm

Cabinet    

• Material : at least 1.2mm thick cold rolled steel

• Attachment method : not standalone, secured to frame

• Material of metal handles and hinges : stainless steel

• Metal hinges opening degree : 90-110 degrees

Reagent rack    

• Shape : Double-Sided Reagent Rack

• Support Structure : Epoxy-Coated Square Pipe Vertical Supports

• Safety Feature : Guard Rails on Both Sides

• Shelf Material : Tempered Glass (minimum 12mm thick) or ceramic, or epoxy resin, or steel with chemical resistant coating

• Configuration : One Rack with Two Shelves per Table Module

• Table surface dividers : 8-12 mm thick tempered glass

Sink    

• Sink Material

• Option 1: Stainless steel for worktop integrated into table surface

• Option 2: High grade epoxy resin, built in the table surface for epoxy resin worktop

• Option 3: Ceramic for ceramic worktop

• Quantity : One Sink Per Table

• Orientation : Sink Unit Positioned Perpendicularly to the Working Surface

Faucet    

• Faucet Material

• Option 1: Solid Brass with High Gloss Epoxy Powder Coating for epoxy resin worktop

• Option 2: Chromed steel

• Option 3: Laboratory dedicated copper main body material with epoxy resin coating

• Durability- UV Fading and Heat Resistant, Minimum 100,000 Life Cycles

Electric Connections:    

• Power receptacles : Each table module shall be equipped with 3 x 230V (from each side: total x 6 per table) European type (Schuko) power receptacles with grounding contact installed on the electric panel.

• Location : The electric panel shall be installed on vertical supports, under lower rack.

• Low voltage connections : The electric panel shall be equipped with 3 (from each side of the panel, in total 6 per table) adjustable DC voltage (0-24V) contacts and 3 (in total 6) 4 mm diameter plugs.

• These shall be centrally controlled from teachers' station only

• Power measurement device : Built-in voltmeters near each 0-24 outlets

• Connection principle : The electric connection between tables located aside shall be cascading

• Ingress protection : Receptacles - IP44

Other Requirements    

• There will be 230V and 0-24V cable installed at the table designed location, connections within the table electric panel will responsibility of the contractor

• Extra Parts - minimum of 3 packages

• hinges, handles, screws etc. for easy substitution if lost or damaged during transportation

• Materials Safety Data Sheet

• For all components in English language mandatory, other languages optional