Raspberry pi- Trainer board & robotics- lab-32/16/8 Manufacturer,Supplier and Exporter in China
Product Code : EL-TLE-14913
- Specification of avr trainer board:
- Program debugging function by PC
- Software Raspberry pi software 1.2.3
- Program download and trace function
- Display the register contents
- Memory contents modification and dump function
- Various Command function
- Included stepper motor interface circuit
- DOT MATRIX unit
- LCD display unit
- DIA and AID converter experiment
- Sound experiment with Speaker
- Interrupt experiments
- Thermistor Sensor
- Bar LED unit
- Key board experiment
- External interface connector
- Display the current BUS status on LED
- Specification of Rovers robotics chassis:
- Adjustable gear box angles
- min. 4 independent DC motors
- min. 4 independent hall effect encoders
- Thick rubber tank treads
- min. 6x AA battery holder
- min. 10Kg/cm stall torque per motor
Description:
If you're looking for a base for your next robot, look no further than the Rover 5. The Rover 5 uses 4 independent motors, each with an optical quadrature encoder and gearbox. The entire gearbox assembly can be rotated at min. 5-degree increments for different clearance configurations. You can even replace the tank treads with traditional wheels.
This isn't a wimpy or flimsy robot base. Weighing in at over 2.5 pounds without batteries, this base is heavy duty and can drive over quite a bit. Check the manual below for dimensional drawings. We now stock acrylic expansion plate for this rover.
- Specification of Raspberry-pi iot learner kit
- Quad Core --1.2GHz Broadcom BCM2837 64bit CPU
- min. 1GB RAM BCM43438 Wi-Fi and Bluetooth Low Energy (BLE) on board
- min. 40-pin Extended GPIO
- min. 4x USB 2 ports
- min. 4 Pole stereo output and composite video port
- Full size HDMI
- CS! camera port for connecting a Raspberry Pi camera
- DSI display port for connecting a Raspberry Pi touchscreen display
- Micro SD port for loading your operating system and storing data
- Upgraded switched Micro USB power source up to 2.5A
- Sense HAT features:
- Official Sense HAT from the Raspberry Pi Foundation
- min. 8x8 LED matrix display
- Accelerometer, gyroscope and magnetometer
- Air pressure sensor
- Temperature and humidity sensor
- Small joystick
- Power Supply Features:
- min. 1.5m Micro USB
- min. 4 changeable heads for use in the UK, Europe, Australia & US regions
- Current rating: min. 2.5A
- Raspberry Pi Case features:
- Designed to house the Raspberry Pi B , Raspberry Pi 2, Raspberry Pi 3 and HAT PCBs
- HAT can be removed without removing the Raspberry Pi from the enclosure
- All cut-outs are pre-cut into the case
- Camera ribbon slot in enclosure lid
- Display ribbon slot in enclosure lid
- Label recess on enclosure base
- Gloss finish
- Specification ofrobobuilder robot :
- Specification Details
- Size/Weight min. 28.5x17x5x10.5cm/1.25kg
- DOF(Degree of Freedom) min. 16 servo motors
- IR sensor Obstacle detection
- Sound sensor Sound detection
- Acceleration sensor Gravity detection
- Bartery(11V Li-poly) min. 30 minutes Approx.
- Bluetooth Optional
- External case Engineering plastic
- Specification of mavic pro dron:
- Product Position: Entry-Level Professional Drone with Powerful Obstacle Avoidance Weight (Battery & Propellers Included): min. 1388 g
- Max Flight Time: Approx. min. 30 minutes
- Vision System: Forward Vision SystemBackward Vision SystemDownward Vision System Obstacle Sensing: Front & Rear Obstacle Avoidance Left & Right Infrared Obstacle Avoidance Camera Sensor: 1" CMOSEffective pixels: min. 20 M
- Max. Video Recording Resolution: min. 4K 60P
- Max Transmission Distance: FCC: min. 4.3 mi
- Video Transmission System: Lightbridge
- Operating Frequency: 2.4 GHz-5.8 GHz
- *min. 5.8 GHz transmission is not available in some regions due to local regulations. Specification of submarine radio control simulation series:
- Specifications
- Name Simulation Series RC Submarine Toy
- Model 777 - 216
- Age min. Above 8 years old
- Remote Control Radio control
- Remote Control Distance min. Above 4m
- RC Submarine Battery Ni-MH battery min. 3.6V/120mAh (included)
- Transmitter Battery min. 4pcs AA 1.5V (not included)
- Charging Time min. Above 10 mins
- Playing Time About min. 8 mins
- Package Size min. 16 x 8 x 10 cm
- Package Contents
- min. 1 x 777 - 216 Simulation Series RC Submarine Toy, 1 x Transmitter, 1 x An Manual
- Specification of Dremel 3D printer:
- Extruder: Single extrusion
- Extruder temperature: Up to 230°C /397°F
- Operating Interface: min. 3.5" full color IPS touch screen
- Maximum Build Volume: 9" x 5.9" x 5.5" / 230 mm x 150 mm x 140 mm
- Layer Thickness: min. 4 mil I 0.004 inches 100 microns 10.10 mm
- SD Card: Up to 32GB in size /3D20 will not work with SD cards larger than 32GB
- Internal Storage: min. 4GB
- Weight (without spool)
- min. 19 pounds 8 az (8.845 kg) Dimensions
- Height: min. 15.7 inches (400 mm)
- Width: min. 19.1 inches (485 mm)
- Depth: min. 13.2 inches (335 mm)
- Specification of touch s 3D printer:
- Product size: min. 275 x 275 x 470mm (W x D x H)
- Weight :8.9kg
- Print type: FFF (Fused Filament Fabrication) Printer structure: Delta type
- Build size: min. 0150 x 160mm
- Bed: Stainless steel + Special Coated Film
- Auto leveling: 0 Extruder: Single Nozzle size: min. 0.4mm
- Layer thinness: 0.05mm — 0.3mm
- Positioning precision: min. 0.01mm
- Filaments: PLA / ABS 1.75mm
- Power: Adapter DC12V/10A
- Control panel: min. 4.3" Touch LCD
- CPU: min. 68MHz 32bit ARM CPU
- Manufacturer Authorization Letter from with contract details and Original or Color Printed
- Catalogue/Brochure-
- [should be submitted by the bidder]
- User manual — [should be submitted on delivery by the bidder]
- Warranty: min. 01(One) with services- Installation, Testing & Commissioning should be provided by the qualified Engineers